by: Yvonne Volante
Perhaps you may have found the dreaded mold lurking in your dwelling
recently. Perhaps you even had to recondition it up. To be sure, it's
ugly, inconvenient, possibly destructive and possibly a hazard to good
health.
Unfortunately, mold can form anywhere circumstances exist to
foster its advance. It regularly evolves in cool damp places.
Usually in locations where temperatures range between 40 to 70
degrees Fahrenheit, with a relative humidity level of 70% or
higher. Though it is possible for certain molds to grow in lower
humidity levels, they are not a common occurrence and rarely a
concern over the more common types of mold. Read more about your
home and other home care issues at
Typical spaces in a domicile where mold tends to take hold
are zones such as bathrooms, basements, ceiling tiles, paneling,
refrigerators, air circumstanceers, humidifiers and
dehumidifiers, trash cans, heating ducts, windowsills, carpeting
and other enclosures where wetness may be captured. |
|
|
Mold appears in different ways, each with varying levels of risk to
health. In low levels mold is pretty much harmless, but in greater
levels the person who comes in contact may suffer allergic symptoms from
the spores, as well as more harmful effects.
There are two forms of mold called Stachybotrys and Memnoniella which
are considered toxic and can have a no-nonsense effect on a persons
health. Smaller symptoms of exposure to these toxic molds may include a
rash, flu-like symptoms, diarrhea, respiratory difficulties, eye
irritations, difficulty breathing, sinus inflammation, headaches,
fatigue and sore throat.
More austere symptoms of exposure to toxic mold may include ear
inflammation, nose bleeds, bleeding of the lungs, memory loss and
arthralgia (joint pain).
Exposure to any type of mold can always have the possibility of bringing
on negative health effects, so it is wise to remove mold when it is
found and to foster contingencys, which can help minimize the chances of
mold appearing again in the future.
First of all, if you find mold in your domicile, purify it right away.
For mold advancing on solid material like metal, basic soap and
detergent should do the trick. Be sure to dry them immediately
afterward. For materials more porous, where mold has sunk in, such as
mattresses or other furnishings, the material should be replaced, as it
is impossible to remove mold completely from these materials.
To prevent mold from forming in the future, check for any and all
sources of wetness. In bathrooms check for leaky faucets or pipes which
are no-nonsense culprits for fostering the incidents for mold raiseth.
Once you have finished, lower the humidity level of your dwelling to
between 30 and 60%. Since most mold advances in circumstances of 70%
relative humidity of higher, keeping humidity low in your home will
greatly reduce the risk of mold forming again in the future.
The steps set forth above are very urgent to follow, especially for
those who may suffer from allergies. An ounce of deterrence now could
save you inconvenience, discomfort, as well as funds in the years ahead.
About The Author
Yvonne Volante, the author, has had extensive experience with
http://www.moldcasr.com and
writes for moldcasr.com, which is the premier mold resource on the
internet.
|
